Author |
Message |
Alsteen
|
Post subject: Tuners Posted: Tue Aug 09, 2005 10:28 pm |
|
Joined: Mon Aug 08, 2005 1:00 pm Posts: 91 Location: Los Angeles
|
Has anyone tried a set of Waverleys on their 12 string? I was thinking that they'd be awfully cool on my 660/12.
|
|
 |
|
 |
Dubhear
|
Post subject: Re: Tuners Posted: Tue Aug 09, 2005 10:45 pm |
|
Joined: Mon Aug 08, 2005 1:00 pm Posts: 279 Location: Lexington, KY
|
You'd have to drill holes and possibly even rout to put those on. Would be cool, but not too good an idea. The single Schaller screw hole is in a completely different place than the two screw holes on Waverlys and the shaft height could be totally off making the slotted tuners too long or short.
|
|
 |
|
 |
DaleFortune
|
Post subject: Re: Tuners Posted: Thu Aug 11, 2005 1:22 am |
|
Joined: Tue Aug 09, 2005 1:00 pm Posts: 592 Location: Aloha, OR
|
I've put them on. You do have to grind the tip off the mounting plate to make them fit the side of the peg head, other than that they are expensive and I've found that the stock factory Kluson replicas work just as well, a different ratio but IMO every bit as nice except for looks.
|
|
 |
|
 |
Alsteen
|
Post subject: Re: Tuners Posted: Thu Aug 11, 2005 3:50 am |
|
Joined: Mon Aug 08, 2005 1:00 pm Posts: 91 Location: Los Angeles
|
|
 |
|
 |
|