Board index » Setup And Technical




Post new topic Reply to topic  [ 8 posts ] 
Author Message
 Post subject: Schaller Machine Heads Part No.For Rick 610?
 Post Posted: Thu Mar 10, 2011 5:15 pm 
Offline

Joined: Thu Oct 18, 2007 4:59 pm
Posts: 90
Location: North London,UK
Hi Again,

As I live in the UK I believe I am unable to order directly from the boutique, so wondered if anyone could advise on the correct part number for the Schaller machine heads used on the 610's?

I know they are generically called 'Schaller M6 mini's', but having visited their website there seems to be a plethora of options under the M6 mini section.

I bought my 610 second hand, and it came with Schaller locking tuners, which I think are a little too heavy for the guitar, and would like to buy the same set that came as stock when the 610 was introduced.

I think part no 506a is probably correct, but wanted to ask the experts-You guys on this forum.

Thanks In Advance
Scott


Top 
 Profile  
 
 Post subject: Re: Schaller Machine Heads Part No.For Rick 610?
 Post Posted: Thu Mar 10, 2011 8:27 pm 
Offline
Site Admin
Site Admin

Joined: Mon Aug 08, 2005 1:00 pm
Posts: 4037
Location: Santa Ana, CA
I don't believe any 610's left the factory with Schallers. I bet if you look on the back of the head you'll see a couple of screw holes for the original Kluson type keys, for which there's a modern, higher quality replacement in the boutique. You should be able to use either the long or short shaft on this guitar.

You can certainly make the Schaller's fit, and they're fine keys, just not like the original.


Top 
 Profile  
 
 Post subject: Re: Schaller Machine Heads Part No.For Rick 610?
 Post Posted: Fri Mar 11, 2011 1:21 pm 
Offline

Joined: Thu Oct 18, 2007 4:59 pm
Posts: 90
Location: North London,UK
Hi John,

Many thanks for getting back to me.

I've taken the Shaller locking tuners off, and it looks to me that whatever the original tuners were, they were just held in place by the one screw.

Here's a pic.The screw hole on the inside is where the original tuners were attached to.

I don't really want to drill anymore holes than the two already there, so would probably go with the ones which would fit the old holes.

Any ideas what they actually were if they were just attached via the one screw?

Thanks


Attachments:
Ric 610 Back Headstock.jpg
Ric 610 Back Headstock.jpg [ 18.72 KiB | Viewed 3571 times ]
Top 
 Profile  
 
 Post subject: Re: Schaller Machine Heads Part No.For Rick 610?
 Post Posted: Fri Mar 11, 2011 1:44 pm 
Offline

Joined: Thu Oct 18, 2007 4:59 pm
Posts: 90
Location: North London,UK
John,just checked the site here and under the archived literature the documentation does state that 610's came with Schallers.

http://www.rickenbacker.com/catalog_pos ... -600-6.jpg

Wonder if any 610 owners out there might be able to chime in here?

Thanks Again


Top 
 Profile  
 
 Post subject: Re: Schaller Machine Heads Part No.For Rick 610?
 Post Posted: Fri Mar 11, 2011 2:10 pm 
Offline
Site Admin
Site Admin

Joined: Mon Aug 08, 2005 1:00 pm
Posts: 4037
Location: Santa Ana, CA
Well, there you have it. I would have said that we stopped making these before we switched but your headstock shows that the catalog was right. Still, it looks like this guitar has had both types at one time or another, which differ in the orientation of the mounting tab.

The southern-most mounting holes would be the factory ones, as we use only the M6 Mini-A, since you can't use the other type on a 12-string guitar. You want the 00525 key if you want the original type, although now that you have two holes, you could use the standard off-the-shelf M6 as sold in music stores. (These are the ones with the "D" gear cover, rather than a circle.)


Top 
 Profile  
 
 Post subject: Re: Schaller Machine Heads Part No.For Rick 610?
 Post Posted: Fri Mar 11, 2011 4:05 pm 
Offline

Joined: Thu Oct 18, 2007 4:59 pm
Posts: 90
Location: North London,UK
Ok, cool that's good to know, and getting the other D type you mentioned will cover the original holes up well, whilst fitting exactly (I hope) the newer holes made by the locking version.

Now I just have to try and find them here in the UK. After a wee bit of searching I have found out that they are callled 'Schaller M6 Industry', with the 135 degree lug.

Thanks for your help John, much obliged that you have taken the time to engage in this thread.

Scott


Top 
 Profile  
 
 Post subject: Re: Schaller Machine Heads Part No.For Rick 610?
 Post Posted: Fri Mar 11, 2011 10:41 pm 
Offline
User avatar

Joined: Mon Dec 15, 2008 12:11 pm
Posts: 219
Location: Hamilton Ontario Canada
My January 1991 JG 610 has Schallers on it...

I prefer the Kluson Style myself... But if you want it back to stock Schallers would be correct for it.

My 610 was originally Black Hardware... I have since replaced everything with White and Chrome Hardware.

Here are pics of how it looked originally

Attachment:
smal head2.jpg
smal head2.jpg [ 109.81 KiB | Viewed 3552 times ]
Attachment:
sml headstock1.jpg
sml headstock1.jpg [ 116.87 KiB | Viewed 3552 times ]

_________________
Brian Morton
A Rickenbacker Fan in Hamilton, Ontario, Canada
===============================
67 FG 625
74 JG 4000
76 JG 430
77 JG 620
77 JG 320
79 JG 4001
80 FG 620/12
81 BG 480
91 JG 610
02 BG 620

Amps -
78 TR7
83 TR25


Top 
 Profile  
 
 Post subject: Re: Schaller Machine Heads Part No.For Rick 610?
 Post Posted: Thu Mar 17, 2011 10:37 am 
Offline

Joined: Thu Oct 18, 2007 4:59 pm
Posts: 90
Location: North London,UK
O_R_F, thanks for the info.

I've just spoken to a dealer here in the UK, who tells me they can specially order M6 minis with the 135 degree lug, which is great, as I can then mount them using the screwholes for the M6 locking tuners.

All good then, and this will cover the existing holes made by the original tuners, so if anyone else faces the same situation M6 minis with 135 degree lugs are possible.

Cheers
Scott


Top 
 Profile  
 
Display posts from previous:  Sort by  
 
Post new topic Reply to topic  [ 8 posts ] 

Board index » Setup And Technical


Who is online

Users browsing this forum: Google [Bot] and 4 guests

 
 

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron

Register    Login    Forum    Search    FAQ
X