Rickenbacker International Corporation - Forum
http://www.rickenbacker.com/forum/

Lowered Truss Rod
http://www.rickenbacker.com/forum/viewtopic.php?f=2&t=14554
Page 1 of 1

Author:  greydominion [ Mon Aug 22, 2011 6:07 am ]
Post subject:  Lowered Truss Rod

I went to adjust the neck on my '86 4001 and couldn't adjust the bass side truss rod. The nut seems to be lower than the other one so I can't get a nut wrench around it because there is little space on the bottom. I'm not the original owner and this is the first time I looked at the truss rods. The rest of the bass is in excellent condition. Any thoughts? Thanks.

Author:  Rickenbrother [ Mon Aug 22, 2011 11:33 am ]
Post subject:  Re: Lowered Truss Rod

Welcome to the forum. A 4001 from '86? That's kind of late for a 4001. Are you sure it's not a 4003? Use the link below and then click on "4001 Setup Part 1" on the left side of the page.

JBN Rickenbacker Setup/Maintenance Videos

I hope that helps you.

Page 1 of 1 All times are UTC - 8 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/