| Rickenbacker International Corporation - Forum http://www.rickenbacker.com/forum/ | |
| Adjusting string height, Rickenbacker 4003 http://www.rickenbacker.com/forum/viewtopic.php?f=2&t=15035 |
Page 1 of 1 |
| Author: | PhilipRWilson [ Thu Mar 29, 2012 3:14 pm ] |
| Post subject: | Adjusting string height, Rickenbacker 4003 |
Hi! I've finally got my new Rickenbacker 4003 and it looks beautiful. Only problem is that I can't find an easy way to adjust the string height without removing the strings and changing every individual bridge. I'm not used to this as my gibson guitar had two screws at each end of the bridge assembly, they could be rotated without equipment, making changes easy without ever having to remove the strings. My question is: Is there a easier way to adjust the string height? or do i have to change every individual bridge? thanks. Phil |
|
| Author: | JohnHall [ Thu Mar 29, 2012 3:22 pm ] |
| Post subject: | Re: Adjusting string height, Rickenbacker 4003 |
As the owner's manual states, just turn the two hex screws on either end of the bridge saddle with the supplied key to raise and lower string height. No need to remove strings or play with the saddles. Manual is available from the "service" tab above, if you're missing that. |
|
| Author: | PhilipRWilson [ Fri Mar 30, 2012 2:50 pm ] |
| Post subject: | Re: Adjusting string height, Rickenbacker 4003 |
Thanks! At first I couldn't find the screws. Epic! |
|
| Page 1 of 1 | All times are UTC - 8 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ | |