| Author |
Message |
|
bowser2533
|
Post subject: Output Jack plate question?  Posted: Sun Feb 15, 2015 4:05 pm |
|
Joined: Tue May 29, 2012 5:00 pm
Posts: 6
|
|
On my 08 ric 360/12 the serial # ric o sound and standard are all stamped into the output jack plate. I recently purchased a 360/12 C64 from a guy near Pittsburgh. On this guitar only the serial # is stamped. The ric o sound and standard are not there. Also Rickenbacker name on the trc is smooth, not raised up like on my 08 and made in the USA is not there. I looked up the serial # on the decoder and the Date of manufacture is May 1998. Is all this normal? Any input? Thanks Gary
|
|
  |
|
 |
|
JohnHall
|
Post subject: Re: Output Jack plate question? Posted: Sun Feb 15, 2015 7:52 pm |
|
 |
| Site Admin |
 |
Joined: Mon Aug 08, 2005 1:00 pm
Posts: 4038
Location: Santa Ana, CA
|
|
The 360/12C64 is a replica of a classic, vintage guitar and therefore has these features to be consistent with history. This guitar, like George Harrison's, does not have the Rick-O-Sound stereo output but rather dual parallel outputs. The nameplate is of the original vinatge style.
|
|
| |
|
|
|
bowser2533
|
Post subject: Re: Output Jack plate question? Posted: Mon Feb 16, 2015 5:46 am |
|
Joined: Tue May 29, 2012 5:00 pm
Posts: 6
|
|
Thank you so much Mr Hall for the quick reply. I did not know that. Gary
|
|
| |
|
|
|
