Rickenbacker International Corporation - Forum
http://www.rickenbacker.com/forum/

Output Jack plate question?
http://www.rickenbacker.com/forum/viewtopic.php?f=2&t=15946
Page 1 of 1

Author:  bowser2533 [ Sun Feb 15, 2015 4:05 pm ]
Post subject:  Output Jack plate question?

On my 08 ric 360/12 the serial # ric o sound and standard are all stamped into the output jack plate. I recently purchased a 360/12 C64 from a guy near Pittsburgh. On this guitar only the serial # is stamped. The ric o sound and standard are not there. Also Rickenbacker name on the trc is smooth, not raised up like on my 08 and made in the USA is not there. I looked up the serial # on the decoder and the Date of manufacture is May 1998. Is all this normal? Any input? Thanks Gary

Author:  JohnHall [ Sun Feb 15, 2015 7:52 pm ]
Post subject:  Re: Output Jack plate question?

The 360/12C64 is a replica of a classic, vintage guitar and therefore has these features to be consistent with history. This guitar, like George Harrison's, does not have the Rick-O-Sound stereo output but rather dual parallel outputs. The nameplate is of the original vinatge style.

Author:  bowser2533 [ Mon Feb 16, 2015 5:46 am ]
Post subject:  Re: Output Jack plate question?

Thank you so much Mr Hall for the quick reply. I did not know that. Gary

Page 1 of 1 All times are UTC - 8 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/