Rickenbacker International Corporation - Forum
http://www.rickenbacker.com/forum/

accent tremelo
http://www.rickenbacker.com/forum/viewtopic.php?f=2&t=3133
Page 1 of 2

Author:  1967-365FG [ Sun Sep 17, 2006 12:07 am ]
Post subject:  accent tremelo

Hello,
I recently installed the bar (that was missing when I bought this guitar) for my accent tremelo on my 1967 365. It works fine except the bolt is always coming loose every I move it down. There is a washer under the bar (above the bolt)

Am I missing something(a part perhaps)? Does anyone else have this problem? Is there any fix?

Thanks.

Author:  1967-365FG [ Sun Sep 17, 2006 12:09 am ]
Post subject:  Re: accent tremelo

Sorry, before I am accused of being an idiot. The washer is below the bolt and above the bar.

Author:  Ricknut63 [ Sun Sep 17, 2006 4:38 am ]
Post subject:  Re: accent tremelo

Sounds like you may be missing a tension washer.Try a drop of Loc-Tite thread locker on the threads,being careful not to get it on the finish.That should take care of your problem.Let us know how it works out.

Author:  MattP123 [ Sun Sep 17, 2006 6:25 am ]
Post subject:  Re: accent tremelo

im not familiar with the vibratos, but if you are missing a lock washer i'd just try replacing that first before the lock tite. you can get one of these at a hardware store for less than 50 cents.

http://www.portlandbolt.com/images/prod ... Washer.gif

that might do the trick.

Author:  TomTrig [ Sun Sep 17, 2006 7:19 am ]
Post subject:  Re: accent tremelo

The original vibrato arm had a nylon washer for a spacer while the reissues use a metal one.
I think the C Series 325 may have gone back to nylon?

Author:  1967-365FG [ Mon Sep 18, 2006 7:42 am ]
Post subject:  Re: accent tremelo

Thanks for the quick response.

Two questions.
If I use this lock tite, will the bar be able to pivot up and down?

The washer that was on on the bolt (since I bought the guitar) is a flat metal washer. It appears original. Is there supposed to be another washer, or is it not the original? The threads on the bolt are quite short, it does not appear to be enough for another washer.

Thanks for all your help!


Author:  Ricknut63 [ Mon Sep 18, 2006 8:59 am ]
Post subject:  Re: accent tremelo

Both of my RIC's with (reissue) Accent Vibrato arms have a thin metal tension washer.The Loc-Tite is for the threads on the bolt ONLY,and keeps the bolt from loosening.The arm still swivels up & down just fine.I glued black plastic "Strat" type switch tips onto the pointed end,though...I don't want to impale my hand,and smash my beloved 325 or 360 in a fit of rage,ala' Pete Townsend...

Author:  JohnHall [ Mon Sep 18, 2006 9:53 am ]
Post subject:  Re: accent tremelo

Just so we're clear here, Townshend's accident was with a Fender, not a RIC vibrato.

Author:  Ricknut63 [ Mon Sep 18, 2006 10:42 am ]
Post subject:  Re: accent tremelo

Point taken,Mr.Hall...thanks for clearing that up...but that OTHER point still scares me,though...no wonder JWL bent his...

Author:  TomTrig [ Tue Sep 19, 2006 7:22 pm ]
Post subject:  Re: accent tremelo

Guys like I said the washer on ac'cent the vibrato was reissued with a metal washer, mainly on the 325v63.

In the 60's the washer was nylon.
http://fabgear.netfirms.com/images/spacer.jpg


Page 1 of 2 All times are UTC - 8 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/