| Rickenbacker International Corporation - Forum http://www.rickenbacker.com/forum/ | |
| Tom Petty 660/12 neck shape http://www.rickenbacker.com/forum/viewtopic.php?f=4&t=16544 |
Page 1 of 1 |
| Author: | andyenobs [ Wed Jan 30, 2019 12:23 pm ] |
| Post subject: | Tom Petty 660/12 neck shape |
I always understood the Tom Petty Limited 660/12 was made with a thicker and wider neck than other 660s. Is this the case ? |
|
| Author: | pauleway [ Wed Jan 30, 2019 2:26 pm ] |
| Post subject: | Re: Tom Petty 660/12 neck shape |
I do believe it is the same as the standard 660/12 model. It is a wider neck width than the standard 330/12 and 360/12 that Rickenbacker puts on these models. It is also (TP 660/12) the same as the Ric - 1993Plus model. |
|
| Author: | ricslinger [ Sun Feb 10, 2019 3:57 pm ] |
| Post subject: | Re: Tom Petty 660/12 neck shape |
Yes the 660/12 TP, 660 & 660/12 all are manufactured with the same neck width. The 620 & 620/12 are still made with the standard neck size. |
|
| Author: | andyenobs [ Mon Feb 18, 2019 3:19 pm ] |
| Post subject: | Re: Tom Petty 660/12 neck shape |
Well I bought a Tom Petty Limited 660/12 FG in 1991 when they came out and sold it in 2016 and I have just bought a 660/6 MG and although I would agree with you about the width of the neck at the nut being the same I am sure the former was thicker front to back. Maybe Mr Hall can advise us. By the way I am in the UK. |
|
| Page 1 of 1 | All times are UTC - 8 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ | |