Joined: Thu Aug 11, 2005 1:00 pm Posts: 924 Location: Kansas City, Missouri
In addition to John's info, you will need to use the tuner bushings currently in your headstock because the #00550 tuner bushings require a slightly larger hole. Also, the C64 tuner shaft is slightly larger than the #00550 tuner shaft, which means that the shaft will be a tighter in the C64 bushing, and possibly require drilling of the bushing oversize. Remove the bushings if you have to drill them so they don't catch on the drill bit and spin in the headstock.
Post subject: Re: Reversing Keywinds on 4001C64S
Posted: Mon Sep 03, 2012 2:24 pm
Joined: Mon Aug 08, 2005 1:00 pm Posts: 4021 Location: Santa Ana, CA
Dane, in the tests we did before I answered his question, we didn't run into this problem. The prexisting bushing worked fine with the modern tuner.
Users browsing this forum: No registered users and 3 guests
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum