| Author |
Message |
|
Maccattack
|
Post subject: Need a screw!  Posted: Tue Jan 17, 2006 5:11 am |
|
Joined: Mon Jan 16, 2006 2:00 pm
Posts: 7
Location: Dublin Ireland
|
|
I have a 1974/5 4001 that is missing a screw. i have been searching for a replacement for years and years but have never found one.
The part in question is one of the stumpy screws that seem to hold the key wind in place. however the keywind has stayed put despite this being missing.
can anyone help me identify the part number and its availability?
ive been told its an old imperial guague screw and no longer available.
any help appreciated...
|
|
  |
|
 |
|
Webmaster
|
Post subject: Re: Need a screw! Posted: Tue Jan 17, 2006 6:13 am |
|
Joined: Sun Aug 07, 2005 1:00 pm
Posts: 309
Location: Santa Ana
|
Quote: I have a 1974/5 4001 that is missing a screw. i have been searching for a replacement for years and years but have never found one.
The part in question is one of the stumpy screws that seem to hold the key wind in place. however the keywind has stayed put despite this being missing.
can anyone help me identify the part number and its availability?
ive been told its an old imperial guague screw and no longer available.
any help appreciated... hmmmm. let's see how long this takes.....
|
|
| |
|
|
|
johnallg
|
Post subject: Re: Need a screw! Posted: Tue Jan 17, 2006 8:53 am |
|
Joined: Thu Sep 22, 2005 1:00 pm
Posts: 1527
Location: S.W. Michigan
|
|
Above - Boutique - Miscellaneous. Compare what is there to another screw you have.
|
|
| |
|
|
|
JohnHall
|
Post subject: Re: Need a screw! Posted: Tue Jan 17, 2006 9:58 am |
|
 |
| Site Admin |
 |
Joined: Mon Aug 08, 2005 1:00 pm
Posts: 4038
Location: Santa Ana, CA
|
|
Rather than holding the keywind in place, are you referring to the big one that holds the gear in place? I do have some of these if that's the one you really mean.
|
|
| |
|
|
|
Maccattack
|
Post subject: Re: Need a screw! Posted: Wed Jan 18, 2006 9:20 pm |
|
Joined: Mon Jan 16, 2006 2:00 pm
Posts: 7
Location: Dublin Ireland
|
|
John. yes i think thats the one.
|
|
| |
|
|
|
grendel
|
Post subject: Re: Need a screw! Posted: Thu Jan 19, 2006 1:21 am |
|
Joined: Tue Aug 16, 2005 1:00 pm
Posts: 879
Location: boston,ga
|
|
What a title, I"m not touching this one with a ten foot pole:)
|
|
| |
|
|
|
Maccattack
|
Post subject: Re: Need a screw! Posted: Sun Jan 22, 2006 4:53 am |
|
Joined: Mon Jan 16, 2006 2:00 pm
Posts: 7
Location: Dublin Ireland
|
|
So john. How do i get one of those screws?
|
|
| |
|
|
|
johnallg
|
Post subject: Re: Need a screw! Posted: Sun Jan 22, 2006 11:41 am |
|
Joined: Thu Sep 22, 2005 1:00 pm
Posts: 1527
Location: S.W. Michigan
|
Quote: So john. How do i get one of those screws? JH is no doubt tied up with NAMM right now so you will probably not get a reply for a short while. A guess, but the RIC execs have been AWOL since NAMM came up.
|
|
| |
|
|
|
LoZoneRanger
|
Post subject: Re: Need a screw! Posted: Sun Feb 05, 2006 4:54 am |
|
Joined: Mon Aug 22, 2005 1:00 pm
Posts: 78
Location: Northwest PA
|
|
While we're on the subject, how can I get screws for the bridge-mute of a 4005 bass? I'd like the package to be functional, even though I have no current intention of using the mute....might be the same screws as with my '84 610/12...looks like the same sort of "cover".
Thanks,
LoZ
|
|
| |
|
|
|
johnallg
|
Post subject: Re: Need a screw! Posted: Mon Feb 06, 2006 8:00 am |
|
Joined: Thu Sep 22, 2005 1:00 pm
Posts: 1527
Location: S.W. Michigan
|
|
| |
|
|
|
