Rickenbacker International Corporation - Forum
http://www.rickenbacker.com/forum/

Need a screw!
http://www.rickenbacker.com/forum/viewtopic.php?f=6&t=1240
Page 1 of 2

Author:  Maccattack [ Tue Jan 17, 2006 5:11 am ]
Post subject:  Need a screw!

I have a 1974/5 4001 that is missing a screw. i have been searching for a replacement for years and years but have never found one.

The part in question is one of the stumpy screws that seem to hold the key wind in place. however the keywind has stayed put despite this being missing.

can anyone help me identify the part number and its availability?

ive been told its an old imperial guague screw and no longer available.

any help appreciated...

Author:  Webmaster [ Tue Jan 17, 2006 6:13 am ]
Post subject:  Re: Need a screw!

Quote:
I have a 1974/5 4001 that is missing a screw. i have been searching for a replacement for years and years but have never found one.

The part in question is one of the stumpy screws that seem to hold the key wind in place. however the keywind has stayed put despite this being missing.

can anyone help me identify the part number and its availability?

ive been told its an old imperial guague screw and no longer available.

any help appreciated...


hmmmm. let's see how long this takes.....

Author:  johnallg [ Tue Jan 17, 2006 8:53 am ]
Post subject:  Re: Need a screw!

Above - Boutique - Miscellaneous. Compare what is there to another screw you have.

Author:  JohnHall [ Tue Jan 17, 2006 9:58 am ]
Post subject:  Re: Need a screw!

Rather than holding the keywind in place, are you referring to the big one that holds the gear in place? I do have some of these if that's the one you really mean.

Author:  Maccattack [ Wed Jan 18, 2006 9:20 pm ]
Post subject:  Re: Need a screw!

John. yes i think thats the one.

Author:  grendel [ Thu Jan 19, 2006 1:21 am ]
Post subject:  Re: Need a screw!

What a title, I"m not touching this one with a ten foot pole:)

Author:  Maccattack [ Sun Jan 22, 2006 4:53 am ]
Post subject:  Re: Need a screw!

So john. How do i get one of those screws?

Author:  johnallg [ Sun Jan 22, 2006 11:41 am ]
Post subject:  Re: Need a screw!

Quote:
So john. How do i get one of those screws?


JH is no doubt tied up with NAMM right now so you will probably not get a reply for a short while. A guess, but the RIC execs have been AWOL since NAMM came up.

Author:  LoZoneRanger [ Sun Feb 05, 2006 4:54 am ]
Post subject:  Re: Need a screw!

While we're on the subject, how can I get screws for the bridge-mute of a 4005 bass? I'd like the package to be functional, even though I have no current intention of using the mute....might be the same screws as with my '84 610/12...looks like the same sort of "cover".

Thanks,
LoZ

Author:  johnallg [ Mon Feb 06, 2006 8:00 am ]
Post subject:  Re: Need a screw!

[edit]

Page 1 of 2 All times are UTC - 8 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/