Board index » Rick restoration from part to finish




Post new topic Reply to topic  [ 12 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: 1957 Combo 450 Refinish
 Post Posted: Wed Nov 09, 2011 8:39 am 
Offline

Joined: Tue Nov 08, 2011 6:04 pm
Posts: 11
Hi all. First post here. Been lurking a bit for some insight on this Combo 450.
My cousin bought this 450 with the original case at a yard sale for a song, and inlisted me to do a refinish in black nitro. I've since disassembled it and stripped the old revarnish job (including the fretboard) to the bare wood. Sealed it and sprayed the Reranch black nitro and cleared the whole thing. I'll detail all the hardware while waiting for the paint to shrink. After color sanding, polishing, and assembly, I'll post some glamour shots of the final project. Hopefully I'll suprise him with it in a week or so.
Thanks for lookin"


Attachments:
DSCN4272.jpg [12.98 KiB]
Not downloaded yet
DSCN4286.jpg [17.19 KiB]
Not downloaded yet
DSCN4292.jpg [18.79 KiB]
Not downloaded yet
Top 
 Profile  
 
 Post subject: Re: 1957 Combo 450 Refinish
 Post Posted: Thu Nov 10, 2011 11:35 am 
Offline
User avatar

Joined: Sun Aug 07, 2005 1:00 pm
Posts: 1416
Location: SF CA
Hey, JG--that is looking really nice. Write me off-list if you need a new pickguard--I've got a couple tucked away.

Here are some shots of two C400s that I've restored (same body, single DeArmond pickup). The JG '57 went to Canada a few years back, and the Cloverfield Green '56 is my own...

JG '57 C400:

Image

Image

Image

The '56 C400, before:

Image

Image

New pickguard in front, original in rear:

Image

Completed restoration:

Image

Image

Image

These are simple guitars, bandsaw and router instruments. But they have terrific playability, a nice tonal range, and strong sound!

_________________
Rickenbackers: I love to play them. I enjoy the challenge of working on them. I love the way they sound.


Top 
 Profile  
 
 Post subject: Re: 1957 Combo 450 Refinish
 Post Posted: Thu Nov 10, 2011 12:37 pm 
Offline

Joined: Tue Nov 08, 2011 6:04 pm
Posts: 11
Nice restorations JJ.Thanks for the pics. I almost want to leave the scratch plate off of the back. Seems like it would be a shame to cover up most of that neck thru. But the screw holes aren't filled, and I already have a single ply guard cut out.
I'll keep the extra PG's you have in mind. Thanks for offering.


Top 
 Profile  
 
 Post subject: Re: 1957 Combo 450 Refinish
 Post Posted: Thu Nov 10, 2011 3:29 pm 
Offline

Joined: Sun Sep 26, 2010 5:52 pm
Posts: 1007
Location: Australia
Good luck with your restoration project, jet- glow combo. Congratulation on you first post as well. It's very fitting that your first post was replied to by Jingle Jangle, he's the Rickenbacker luthier extraordinaire. Some of his work is showcased under Ric Restoration, as you will see his result speak for themselves, he also build acoustic from scratch some of them are show!

Isn't that green C4oo,of jj's just so cool! We will a wait your glamour shots when all the work is completed


Top 
 Profile  
 
 Post subject: Re: 1957 Combo 450 Refinish
 Post Posted: Thu Nov 10, 2011 3:51 pm 
Offline
User avatar

Joined: Sun Aug 07, 2005 1:00 pm
Posts: 1416
Location: SF CA
jet-glo combo wrote:
Nice restorations JJ.Thanks for the pics. I almost want to leave the scratch plate off of the back. Seems like it would be a shame to cover up most of that neck thru. But the screw holes aren't filled, and I already have a single ply guard cut out.
I'll keep the extra PG's you have in mind. Thanks for offering.


The back plate on the C400s took a number of forms and had a number of finishes. My Green C400 had no back plate, but was instead finished in a thick coating of gray enamel that had horsehair embedded in it for a scratchproof, non-skid finish.

Why non-skid? Because a slippery guitar hanging from a single-point saxophone strap would be a skittish critter to tame while trying to solo "How High the Moon"!

That plated ring on the back of the bass tulip petal is the center of gravity for the guitar, and the sax strap attaches to it with a "T"-shaped fitting.

I fitted a back plate to my C400 which was flocked with gray flocking and fastened to the body with small brads. Although my guitar uses a conventional strap (as most eventually did), the ring on the back remains, as it has the serial number stamped on it! The flocked back plate works very well to keep the guitar in place.

_________________
Rickenbackers: I love to play them. I enjoy the challenge of working on them. I love the way they sound.


Top 
 Profile  
 
 Post subject: Re: 1957 Combo 450 Refinish
 Post Posted: Sat Dec 17, 2011 9:08 pm 
Offline

Joined: Tue Nov 08, 2011 6:04 pm
Posts: 11
--------------------------------------------------------------------------------

Well, it took me a month and a half, and I painted it twice because I'm picky, but I finished the 57' Ric Combo 450 for my cousin just in time for Christmas. He gets to see and play it for the first time among the family at our annual X-mas get together next week. I'll have to take some pics of him playin' it. In the meantime, I'll let everyone here get a look see first!


Attachments:
DSCN4347[1].jpg [41.55 KiB]
Not downloaded yet
DSCN4353[1].jpg [38.7 KiB]
Not downloaded yet
DSCN4362[1].jpg [27.63 KiB]
Not downloaded yet
Top 
 Profile  
 
 Post subject: Re: 1957 Combo 450 Refinish
 Post Posted: Sun Dec 18, 2011 5:57 am 
Offline

Joined: Tue Nov 08, 2011 6:04 pm
Posts: 11
More pics...


Attachments:
DSCN4358[1].jpg [34.38 KiB]
Not downloaded yet
DSCN4359[2].jpg [34.42 KiB]
Not downloaded yet
DSCN4361[1].jpg [40.35 KiB]
Not downloaded yet
Top 
 Profile  
 
 Post subject: Re: 1957 Combo 450 Refinish
 Post Posted: Sun Dec 18, 2011 6:02 am 
Offline

Joined: Tue Nov 08, 2011 6:04 pm
Posts: 11
...Combo 450 pics, thanks for looking...


Attachments:
DSCN4369[1].jpg [34.8 KiB]
Not downloaded yet
DSCN4371[1].jpg [25.22 KiB]
Not downloaded yet
DSCN4367[1].jpg [30.13 KiB]
Not downloaded yet
Top 
 Profile  
 
 Post subject: Re: 1957 Combo 450 Refinish
 Post Posted: Thu Dec 22, 2011 5:04 am 
Offline

Joined: Tue Nov 08, 2011 6:04 pm
Posts: 11
Well, I presented the refinished Ric to my Cousin John this week, and after seeing the look on his face when he opened the case, and seeing him play it again was real satisfying for me. Glad to get it back to him for Christmas!


Attachments:
IMG_4511-1[1].jpg [21.66 KiB]
Not downloaded yet
IMG_4517-1[1].jpg [20 KiB]
Not downloaded yet
IMG_4514-1[1].jpg [22.31 KiB]
Not downloaded yet
Top 
 Profile  
 
 Post subject: Re: 1957 Combo 450 Refinish
 Post Posted: Thu Dec 22, 2011 3:51 pm 
Offline

Joined: Sun Sep 26, 2010 5:52 pm
Posts: 1007
Location: Australia
Nice job there J-GC, very cool small guitar. I'm sure your brother was wrapped in see it restored. It will be a real blast from the past to play :D

What does it sound like???


Top 
 Profile  
 
Display posts from previous:  Sort by  
 
Post new topic Reply to topic  [ 12 posts ]  Go to page 1, 2  Next

Board index » Rick restoration from part to finish


Who is online

Users browsing this forum: No registered users and 1 guest

 
 

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

Register    Login    Forum    Search    FAQ
X