Rickenbacker International Corporation - Forum
http://www.rickenbacker.com/forum/

Echo Amplifier
http://www.rickenbacker.com/forum/viewtopic.php?f=8&t=13165
Page 1 of 1

Author:  fido [ Tue Jul 20, 2010 1:40 pm ]
Post subject:  Echo Amplifier

Hi there,
I wondered if anyone on here owns or can provide information on the early echo amps made by Rickenbacker to an Echosonic design. I don't know if they used the same tape transport as the Echosonic but if they did I would like to get photos etc. I am hoping to build a replica of the Echosonic, as used by Chet Atkins, Scotty Moore etc.

Author:  Echosonic27 [ Thu Sep 08, 2011 12:44 pm ]
Post subject:  Re: Echo Amplifier

Hi there,
I can provide lots of information to anyone wanting to build an Echosonic replica, including photos, measurements, details, contruction plans, etc. Just message me. :-)

Author:  Echosonic27 [ Thu Sep 29, 2011 9:05 am ]
Post subject:  Re: Tape Echo Board

Here are a few of photos of my restored tape echo board in my 1961 Rickenbacker Ek-O-Sound M-30. You can see the placement of the components, as well as the way the motor is setup with the idler wheel and the flywheel/capstan.

Attachments:
TapeBoard1.jpg
TapeBoard1.jpg [ 73.11 KiB | Viewed 7581 times ]
TapeBoard2.jpg
TapeBoard2.jpg [ 82.07 KiB | Viewed 7581 times ]
TapeBoard3.jpg
TapeBoard3.jpg [ 109.2 KiB | Viewed 7581 times ]

Author:  Echosonic27 [ Thu Sep 29, 2011 9:11 am ]
Post subject:  Re: Tape Echo Board

As well, I removed all the components from my tape board, and scanned both the Top and Bottom of it on a large photocopier. I used WinZIP to place each of the 2 scanned JPG photos in their separate .ZIP file - attached to this post. you will have to extract them first, but if you print them out, you can use them as a template to know the exact size and placement of the board. The board is 3/4" thick plywood, 9" wide, and 20.2" long.

Attachments:
TapeBoard_Top.zip [171.33 KiB]
Downloaded 584 times
TapeBoard_Bottom.zip [157.2 KiB]
Downloaded 603 times

Page 1 of 1 All times are UTC - 8 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/