Board index » General Forum




Post new topic Reply to topic  [ 37 posts ]  Go to page Previous  1, 2, 3, 4
Author Message
 Post subject: Re: Ebay hunting
 Post Posted: Thu Nov 17, 2011 2:42 pm 
Offline

Joined: Sun Sep 26, 2010 5:52 pm
Posts: 1007
Location: Australia
telemaster wrote:
Nope, not from the UK. I just love their cars. I'm in the "colonies"...land of the Rickenbacker. In fact I grew up within 30 miles or so of the RIC factory in Southern California. I am truly excited and anxious to hear my 360. And it is torturing me that I am having such a hard time finding the tailpiece for it. Trying hard not to just fabricate something, just so I can hear the durn thing. I would really rather do it right. I don't think I am going to be able to resist the temptation to just build something for a tailpiece if one doesn't turn up soon.


Ok i'm, with you having that many Morris's i thought you must be from the UK
Hope you get that tail piece or you might have to go to the drawing room!


Top 
 Profile  
 
 Post subject: Re: Ebay hunting
 Post Posted: Mon Aug 27, 2012 5:29 pm 
Offline

Joined: Sat Sep 03, 2011 6:17 pm
Posts: 40
Well, this thread has been dead since last November, but I have news. Not only did I find and purchase the "F" style tail piece that I started a new thread about. I found it right on RIC's ebay web presence.... the best part is that it is RAW, that is to say casting flash still on the pieces and it has not been chrome plated. This is going to allow me to modify this tail piece in a way I had only dreamed of doing. The main complaint about the "R" tail piece is the difficulty in stringing the guitar. The ball ends not staying in their slots while one fiddles with the other end of the string trying to affix it to the tuner. My plan is to fill in the slots with weld, which you would not want to do if it had already been plated, and mill the new solid piece so that the faces are all nice and even. Then I plan on drilling holes though this new solid area instead of slots thereby trapping the strings ball ends and rendering the traditional issues with the "R" tailpiece non-existent. This will solve another problem that I found when the tailpiece arrived. I did not know before laying my hands on one that the strings do not "track" straight into the tailpiece. The spread from string 1 to 12 is exacxtly 2.0" on my bridge but the trace is 2.25" on my tailpiece. This would not be a problem with the "normal" shorter "R" tailpiece as there is enough length of the string behind the bridge to allow the strings to splay out as they reach the tailpiece, but since the end of the "Harp" is so much closer, there might be a problem with the angle being too great for the strings to have enough down force to stay seated in their grooves without deepening them. By welding the tailpiece slots closed and making this area a solid block, I will be able to readjust the trace of the strings to a straight through pull. I will post pix of my progress as it happens. But to be sure, it will look cool. I tested it for fit by just laying it on top of the long trapeze style that is on the guitar now and it looks great. Now off to the shop.....


Top 
 Profile  
 
 Post subject: Re: Ebay hunting
 Post Posted: Mon Aug 27, 2012 6:47 pm 
Offline

Joined: Sun Oct 08, 2006 6:07 am
Posts: 3717
Remember these are cast, not forged, so a "weld" might be a bit of a problem if not done very, very carefully.


Top 
 Profile  
 
 Post subject: Re: Ebay hunting
 Post Posted: Tue Aug 28, 2012 2:58 am 
Offline

Joined: Sat Sep 03, 2011 6:17 pm
Posts: 40
Thanx for the warning. I wish I had the skills to do this myself but I do have just enough common sense to know that I need help with this task. I am not NEARLY welder enough tro tackle this delicate project. Do you have an opinion on which route I should choose of the two methods my little pea brain has concocted. 1) fill all the slots with beads and grind the resulting mass until it is "surfaced" in such a way as to allow me to drill the holes where I want. or have the little teeth (for lack of a better term) which make up the slot arrangement, milled off first then weld a solid block to the flattened area? The first method might present a problem with the drilling if the weld that fills between the teeth is not of the same or similar hardness and might cause the bit to wander. Any suggestions would be welcomed.
Thanx in advance for any ideas.


Top 
 Profile  
 
 Post subject: Re: Ebay hunting
 Post Posted: Wed Aug 29, 2012 6:55 pm 
Offline

Joined: Thu Sep 08, 2011 7:45 pm
Posts: 9
Its been exactly a year since Ive won the 320 on Ebay.
That was the weekend of Hurricane Irene passing thru NYC.
I hadnt even realized Id won til that Moday morning after the auction closed Saturday Nite.

I still love the guitar, and try to play it a bit every nite. But yes, I still think about picking up a 325C58. Although Ive been determined to resist Gear Acquisition Syndrome. I havent modded the body & only bought new strings for it. So its been a little exercise on playing music, and not tinkering with the parts. But hey, eventually I'll need another Ric, right? ;)

Many thanks to everyone on the forum.
-Brnrd


Top 
 Profile  
 
 Post subject: Re: Ebay hunting
 Post Posted: Sat Sep 01, 2012 4:04 pm 
Offline

Joined: Sun Sep 26, 2010 5:52 pm
Posts: 1007
Location: Australia
MrBern Yes I remember your first post, it was an interesting purchase from ebay and for a short while we were concerned as it only had one truss rod. Mr Hall was good to explain that for a short period around that time some were made with a single rod. I recall your guitar was also sign Maria.....We thought it may have been Mario... it was Maria!

Now did you find a name for her??????????????? :D

i think another Ric would be great for you, but try to play different models, new and older and vintage and maybe not all short scale......unless that's your thing!

I'm glad you still love the guitar, play it every night, that's really good. :D


Top 
 Profile  
 
 Post subject: Re: Ebay hunting
 Post Posted: Wed Sep 19, 2012 10:29 am 
Offline

Joined: Thu Apr 15, 2010 3:13 am
Posts: 22
Location: United Kingdom
Hi there, I have a mid 80s 320 and it has a single truss rod. I had a similar concern about the single rod, but the guys at Rickenbacker confirmed that it was correct. Enjoy your guitar!!


Top 
 Profile  
 
Display posts from previous:  Sort by  
 
Post new topic Reply to topic  [ 37 posts ]  Go to page Previous  1, 2, 3, 4

Board index » General Forum


Who is online

Users browsing this forum: Bing [Bot] and 2 guests

 
 

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

Register    Login    Forum    Search    FAQ
X